dynamic_text=foundsc50_1,"DLLs used in earlier versions of Sybase Central were found in %DstDir%"
static_text="These DLLs are no longer required."
static_text=
static_text="Do you want to remove them now?"
static_text=
push_button=+"&Yes"
push_button=^"&No"
[Dialog]
name=FoundSQLCentral
dynamic_text=foundsqlcent_1,"Files belonging to Sybase Central have been found in %DstDir%."
static_text="Sybase Central is now installed in the common Sybase tools directory."
static_text=
static_text="Do you want to remove these files from their previous location? If you choose 'Yes', the files will be removed from the SQL Anywhere directory and installed in the Sybase Tools directory. If you choose 'No', they will be installed into the Sybase Tools directory, and the previous version will be left in the SQL Anywhere directory."
static_text=
push_button=+"&Yes"
push_button=^"&No"
[Dialog]
name=HiThere
condition=ByPassFirst !
radio_button=Install,true,"&Install the software"
radio_button=ReInstall,false,"&Reinstall the software"
radio_button=UnInstall,false,"&Uninstall the software"
radio_button=MakePackage,false,"Create a &package for Microsoft Systems Management Server", SrcIsCD IsSSS ! IsNLMInstall ! IsWin IsWinNT | IsWin95 | & & &
static_text=
push_button=.+"&OK"
push_button=?"&Help"
push_button=^"&Cancel"
[Dialog]
name=PackageInfo
condition=MakePackage
width=60
static_text="Please specify the directory where the SMS package for %AppName% will be installed."
static_text=
edit_control=PackageDir,,"Package directory:"
static_text=
static_text="On the following screens, specify options for which components will be installed and the directories where %AppName% will be installed on the client machine."
static_text=
push_button=-"&Previous..."
push_button=.+"&OK"
push_button=^"&Cancel"
[Dialog]
name=DstDir
condition=Install ReInstall MakePackage | |
width=70
static_text="Please specify the directory where %AppName% will be installed."
static_text="",IsNLMInstall ! IsNID ! &
static_text="Directory for SQL Anywhere:",IsNLMInstall ! IsNID ! &
static_text="Other components will be installed into the following directories:",HasSQLCent HasDynamo HasDynamoDeploy HasInfoMaker HasInfoMakerRT HasOpSrv WinComp | | | | | | IsNID ! &
static_text="If you choose 'Per seat', the package will apply the license when the package is being executed by SMS clients.
static_text=
static_text="If you choose 'Concurrent user', the package will install software on clients UNLICENSED. You must then create a licensing package from your license disk. That package will apply the conurrent user license to the unlicensed clients when executed.
static_text=
static_text="Clients should have the name and company fields filled in under the options section of Package Command Manager. This allows licensing to be performed.
static_text=
push_button=.+"&OK"
[Dialog]
name=Final
condition=Install
static_text="@ will now copy any selected files"
static_text=
push_button=-"&Previous..."
push_button=.+"&OK"
push_button=^"&Cancel"
[Dialog]
name=MaintainFinal
condition=ReInstall
width=60
static_text="@ will now copy all selected components and remove any un-selected components."
static_text=
push_button=-"&Previous..."
push_button=.+"&OK"
push_button=^"&Cancel"
[Dialog]
name=UnInstallDir
condition=UnInstall
width=70
static_text="Please specify the directory where %AppName% was installed."
static_text=
static_text="Directory for SQL Anywhere:",IsNLMInstall !
static_text="Other components will be uninstalled from the following directories.",HasSQLCent HasDynamo HasDynamoDeploy HasInfoMaker HasInfoMakerRT HasOpSrv WinComp | | | | | |
dynamic_text=hun_2,"It was not found in %DstDir%."
static_text=
push_button=.+"&OK"
[Dialog]
name=Help_Options
width=60
static_text="", HasSQLCent
static_text="This installation includes Sybase Central. Indicate whether it should be installed.", HasSQLCent
static_text="", HasDynamo HasDynamoDeploy |
static_text="This installation includes NetImpact Dynamo. Indicate whether it should be installed.", HasDynamo HasDynamoDeploy |
static_text="", HasInfoMaker
static_text="This installation includes Powersoft InfoMaker. Indicate whether it should be installed.", HasInfoMaker
static_text="", HasInfoMakerRT
static_text="This installation includes the Powersoft InfoMaker Deployment Kit. Indicate whether it should be installed.", HasInfoMakerRT
static_text="",HasDev
static_text="This installation includes components for developing database applications. Indicate whether these components should be installed.",HasDev
static_text="",HasOld
static_text="This installation includes DLLs for running applications created using version 3.2 or 4.0 of Watcom SQL. Indicate whether these DLLs should be installed.",HasOld
static_text="",HasSysNLM
static_text="This installation needs to know which version of NetWare your server is running so that certain files can be installed. Indicate which version you are running." ,HasSysNLM
static_text=
push_button=.+"&OK"
[Dialog]
name=Help_OpSrvOptions
width=60
static_text=""
static_text="Indicate if you would like to install the SQL Anywhere Open Server Gateway. The Open Server Gateway requires the Sybase Open Server components. These are included with many Sybase software packages. Select the option to install them if you do not currently have them installed."
static_text=
push_button=.+"&OK"
[Dialog]
name=LicenseIntro
condition=ApplyLicense
width=60
static_text="@ will now apply or reapply the license to the Sybase SQL Anywhere Server executable."
static_text="",$IsLicConCur ! $IsLicPerSeat ! &
static_text="Select the method of licensing you have purchased:",$IsLicConCur ! $IsLicPerSeat ! &
static_text="Enter the drive letter of the drive that you wish to use to make your diskette set."
static_text="",IsWin !
static_text="Choose 'Format diskettes before copying files' if you want to use unformatted diskettes for your diskette set.",IsWin !
static_text=
push_button=.+"&OK"
[Dialog]
name=Help_HiThere
width=60
static_text="Choose whether you want to install, reinstall or uninstall %AppName%. Reinstalling the software will copy all selected components and remove any un-selected components."
static_text="", SrcIsCD IsSSS ! &
static_text="You also have the option of creating installation diskettes so that this software can be installed on a machine that does not have access to a CD-ROM drive.", SrcIsCD IsSSS ! &
static_text="If you are a System Administrator using Microsoft Systems Management Server, you can also create a package for unattended installation.", SrcIsCD IsSSS ! IsNLMInstall ! IsWin IsWinNT | IsWin95 | & & &
static_text=
push_button=.+"&OK"
[Dialog]
name=Help_DstDir
width=60
static_text="Choose the directory in which you want to install this application. If you have previously installed it, @ will use the SQLANY environment variable to decide where to install the software. If you do not want to upgrade a previous installation, choose a different directory.", IsNID !
static_text="This installation includes files that are installed in the Sybase database tools directory. Enter the name of the directory where you want these common Sybase files to be installed.",HasSQLCent HasDynamo HasDynamoDeploy | |
static_text="",HasInfoMaker HasInfoMakerRT |
static_text="This installation includes Powersoft development components. Enter the name of the directory where you want these tools to be installed.",HasInfoMaker HasInfoMakerRT |
static_text="",HasOpSrv
static_text="This installation includes the Sybase Open Server components. These are included with many Sybase software packages. If you do not currently have them installed, enter the name of the directory where they should be installed.",HasOpSrv
static_text="",WinComp
static_text="This installation includes files that will be installed in the Windows directory. Enter the name of the directory where Windows is installed.",WinComp
static_text="Sybase SQL Anywhere 5.5 has been successfully installed."
static_text=
static_text="You should now refer to:"
dynamic_text=h_read,"%DstDir%\readme.1st"
static_text="for information on the latest changes to the software. It contains important information for users of previous versions of Sybase SQL Anywhere or Watcom SQL."
static_text=
push_button=.+"&OK"
[Dialog]
name=Evaluation
width=60
condition=IsEval
static_text="Copyright 1997, Sybase, Inc. All Rights Reserved."
static_text=
static_text="This software is licensed for evaluation purposes only pursuant to the terms of the SYBASE NO-CHARGE 60 DAY SOFTWARE EVALUATION LICENSE AGREEMENT (the 'Evaluation License'). As stated in the Evaluation License, this software is licensed to you on an 'as is' basis without warranty of any kind on a no-charge basis for a period of 60 days during which time you may use the software for evaluation purposes only and not for development or production use. The text of this license is contained in the file 'license.txt', %LicTxtLocation%."
static_text=
static_text=" Please confirm your acceptance of these license terms:"
static_text="I accept and agree to abide by the terms and conditions of the 'SYBASE NO-CHARGE 60 DAY SOFTWARE EVALUATION LICENSE AGREEMENT'."
push_button=+"&Yes"
push_button=*"&No"
[Dialog]
name=InsertDisk
static_text="@ needs the following diskette:"
dynamic_text=DiskDesc,""
static_text=
static_text="Please insert or specify new path"
edit_control=SrcDir,,"Source Directory:"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=InsertFormattedDisk
static_text=
dynamic_text=FormattedDiskInfo,""
dynamic_text=ifd_1,"Please insert a diskette into '%MakeDiskDrive%'."
static_text=
dynamic_text=ifd_2,"Label the diskette as '%DiskDesc%'."
static_text="All existing data on the diskette will be destroyed."
static_text=
static_text="If you have already made this diskette, press 'Skip'"
static_text=
push_button=+"&OK"
push_button=>"&Skip"
push_button=^"&Cancel"
[Dialog]
name=InsertDisk1
static_text=
dynamic_text=FormattedDiskInfo,""
static_text=
static_text="@ must write configuration information to the install diskette"
dynamic_text=id1_1,"Please insert DISK01 into '%MakeDiskDrive%'."
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=Modify
static_text=
dynamic_text=AutoText,""
static_text=
static_text="@ can:"
radio_button=ModNow,1,"&Make all the modifications for you"
radio_button=ModLater,0,"&Let you make the modifications later"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=ModifyEnvironment
static_text=
static_text="@ needs to modify environment variables in the registry."
static_text=
static_text=="@ can:"
radio_button=ModUser,0,="Modify current &user environment variables"
radio_button=ModMachine,1,="Modify local &machine environment variables"
radio_button=ModLater,0,="&Let you make the modifications later"
static_text=
push_button=+"&OK"
push_button=?"&Help"
push_button=^"&Cancel"
[Dialog]
name=Help_ModifyEnvironment
static_text=
static_text="Components of this application can be run as an NT service. If you wish to run this application as a service, or you are not sure, choose the 'modify local machine' option."
static_text=
push_button=+"&OK"
[Dialog]
name=DLLInstall
static_text="@ attempted to install the file:"
dynamic_text=FileDesc," "
static_text="in this directory:"
dynamic_text=DLLDir," "
static_text="but, it currently exists in"
dynamic_text=OtherDLLDir," "
static_text=
radio_button=DLL_Delete_Old,,"Install the new file and &delete the existing file"
radio_button=DLL_Keep_Both,,"Install the new file and &keep the existing file"
radio_button=DLL_Replace_Old,,"&Replace the existing file with the new file"
radio_button=DLL_Dont_Install,,"Do ¬ install the new file"
static_text=
check_box=DLL_Skip_Dialog,0,"&Use the current choice for all subsequent DLLs"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=ReadOnlyFile
static_text="@ attempted to install the file:"
dynamic_text=FileDesc," "
static_text="but found it marked read-only"
static_text=
radio_button=RO_Replace_Old,,"&Install the file anyway"
radio_button=RO_Dont_Install,,"&Do not install this file"
static_text=
check_box=RO_Skip_Dialog,0,"&Use the current choice for all read-only files"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=DeleteReadOnlyFile
static_text="@ attempted to remove the file:"
dynamic_text=FileDesc," "
static_text="but found it marked read-only"
static_text=
radio_button=RO_Remove_Old,,"&Remove the file anyway"
radio_button=RO_Dont_Remove,,"&Do not remove this file"
static_text=
check_box=RO_Skip_Remove,0,"&Use the current choice for all read-only files"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=CantOpen
static_text=
dynamic_text=OpenError," "
static_text=
static_text="@ will now stop."
push_button=*"&OK"
[Dialog]
name=NewerFile
static_text="@ attempted to install the file:"
dynamic_text=FileDesc," "
static_text="but found a newer version already existed"
static_text=
radio_button=Newer_Replace_Old,,"&Install the file anyway"
radio_button=Newer_Dont_Install,,"&Do not install this file"
static_text=
check_box=Newer_Skip_Dialog,0,"&Use the current choice for all newer files"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=License
static_text="Please fill in the following License information:"
static_text=
edit_control=LicenseName,," Name:"
static_text=
edit_control=LicenseCompanyName,,"Company:"
static_text=
dynamic_text=LicenseMessage,""
push_button=+"&OK"
push_button=^"&Cancel"
[Dialog]
name=LocCfg
static_text="@ Can not find the following file:"
dynamic_text=FileToFind,""
static_text=
check_box=CfgFileCreate,1,"&Create the file"
static_text=
static_text="Otherwise, specify a new drive:"
edit_control=CfgDir,,"Drive Letter:"
static_text=
push_button=+"&OK"
push_button=^"&Cancel"
[ErrorMessage]
IDS_ERROR="%s"
IDS_NODISKFOROPTION="This diskette set does not contain the requried option."
IDS_BADCRC="Internal error unpacking: '%s' - bad CRC."
IDS_NOMEMORY="Insufficient memory to run @.&\n Close an application and try again."
IDS_NOSETUPINFOFILE="The %s file cannot be found.\nPlease verify the distribution diskette."
ID_NOTEMPSPACE="A drive could not be found with at least %ldK free to write a temporary file needed by @."
IDS_NODISKSPACE="Drive %c: contains %ldK of free disk space.\n@ requires a minimum of %ldK.&\n\nThe installation may fail. Do you want to proceed anyway?"
IDS_NODISKSPACE_UNC="'%s' contains %ldK of free disk space.\n@ requires a minimum of %ldK.&\n\nThe installation may fail. Do you want to proceed anyway?"
IDS_UNCPATH_NOTEXIST="Error: Drive '%s' does not exist.\nTry another drive."
IDS_UNCPATH_NOTWRITABLE="Error: Drive '%s' is not writable.\nTry another drive."
IDS_ASSUME_ENOUGHSPACE="Cannot determine how much free disk space is on '%s'.\nAssume there is enough space and continue?"
IDS_CANTMAKEDIR="The %s directory cannot be created.&\nEnter another directory or try another drive."
IDS_QUERYABORT="@ has not completed installing the software.\nAre you sure you want to stop installation?"
IDS_SETUPNOGOOD="The software has not been successfully installed!\nYou must run @ again before using the software."
IDS_UNSETUPNOGOOD="The software has not been successfully uninstalled!\nYou must run @ again to completely remove the software."
IDS_PMADDNOGOOD="@ could not add the application(s) to the Program Manager.&\nDo you wish to ignore this problem and continue?"
IDS_PMREMNOGOOD="@ could not remove application(s) from the Program Manager.&\nDo you wish to ignore this problem and continue?"
IDS_UNSETUPCOMPLETE="@ has completed successfully."
IDS_COMPLETE="@ has completed successfully."
IDS_NOMEMORYCOPY="Insufficient memory to copy file.&\nTry again or cancel @."
IDS_CANTOPENDST="Cannot create destination file:\n %s.&\nTry again or cancel @."
IDS_CANTOPENDST_NONAME="Cannot create destination file.&\nTry again or cancel @."
IDS_CANTFINDAUTOEXEC="@ cannot find the original AUTOEXEC.BAT file"
IDS_CANTFINDCONFIGSYS="@ cannot find the original CONFIG.SYS file"
IDS_COPYAUTOEXEC="@ will place the contents of your original\nAUTOEXEC.BAT and CONFIG.SYS files\n in the following backup files:\n\n %s\n %s"
IDS_COPYCONFIGSYS="@ will place the contents of your original CONFIG.SYS file in the following backup file: \n\n %s\n"
IDS_NEWAUTOEXEC="@ will save the changes it would make to\nyour AUTOEXEC.BAT and CONFIG.SYS files\nin the following backup files:\n\n %s\n %s"
IDS_NEWCONFIGSYS="@ will save the changes it would make to your CONFIG.SYS file in the following backup file:\n\n %s\n"
IDS_ERRORBACKAUTO="An error occurred trying to create the backup\ncopy of your AUTOEXEC.BAT file"
IDS_ERRORBACKCONFIG="An error occurred trying to create the backup\ncopy of your CONFIG.SYS file"
IDS_CHANGES="@ will save the changes it would make to\nyour Environment in the following file:\n\n %s"
IDS_OS2CONFIGSYS="The changes to the CONFIG.SYS file are required to run the software. Please shutdown your system and restart to allow the changes to take effect.\n"
IDS_NT_REBOOT="@ has completed installing the software.&\n\nYou should reboot your computer so\nthat the changes to your system setup\nwill take effect."
IDS_OS2_REBOOT="@ has completed installing the software.&\n\nYou should reboot your computer so\nthat the changes to your CONFIG.SYS\nwill take effect."
IDS_WINDOWS_REBOOT="@ has completed installing the software.&\n\nYou should reboot your computer so\nthat the changes to your AUTOEXEC.BAT,\nCONFIG.SYS and Windows .INI files will take effect."
IDS_DOS_REBOOT="@ has completed installing the software.&\n\nYou should reboot your computer so\nthat the changes to your AUTOEXEC.BAT\nand CONFIG.SYS will take effect."
IDS_ERROR_WRITING="An I/O error occurred while writing to the file '%s'"
IDS_ERROR_OPENING="An I/O error occurred while opening the file '%s'"
IDS_ERROR_CLOSING="An I/O error occurred while closing the file '%s'"
IDS_FIRST="%s"
IDS_UNKNOWNERROR="Unknown error"
IDS_RENAMEERROR="Cannot rename to %s.&\nContinue with PATCH process?"
IDS_PATCHFILEERROR="Cannot apply patch file %s.&\nContinue with PATCH process?"
IDS_COPYFILEERROR ="Cannot copy file %s.&\nContinue with PATCH process?"
IDS_DELETEFILEERROR ="Cannot delete file %s.&\nContinue with PATCH Process?"
IDS_CREATEDIRERROR="Cannot create directory %s.&\nContinue with PATCH Process?"
IDS_NOTPATCHFILE="%s is not a patch file."
IDS_CANTFINDOUTPUT="Cannot find output file (to be patched) %s."
IDS_NOATTRIBUTES="Cannot find file attributes of %s."
IDS_CANTWRITE="Cannot write to file %s."
IDS_BADLENGTH="File length Error"
IDS_WRONGCHECKSUM="Invalid Checksum Error"
IDS_CANTCREATEEFILE="Cannot create file %s."
IDS_CANTDELETEFILE="Cannot delete file %s."
IDS_CANTOPENSRC="Cannot open source file:\n%s."
IDS_CANTRENAME="Cannot rename %s to %s."
IDS_PATCHABORT="Patch Process Aborted."
IDS_ENV_CHANGES="Required changes to environment:"
IDS_ADD_TO_VAR="add the following to the '%s' variable"
IDS_SET_VAR_TO="set variable '%s' to"
IDS_DISKETTES_NEEDED="You will need %d diskettes"
IDS_DRIVE_SPEC="Drive %c: "
IDS_DRIVE_SPEC_UNC="Drive '%s' "
IDS_DRIVE_FREED=" will be freed."
IDS_DRIVE_REQUIRED=" required, "
IDS_DRIVE_AVAILABLE=" available."
IDS_MODIFY_AUTOEXEC="@ needs to modify AUTOEXEC.BAT and CONFIG.SYS."
IDS_MODIFY_CONFIG="@ needs to modify CONFIG.SYS."
IDS_MODIFY_ENVIRONMENT="@ needs to modify environment variables in the registry."
IDS_INCONSISTENT="@ has determined that you are installing over a previous version of the software, or have manually added or removed files. Do you wish to install all missing files?"
IDS_NO_FILES_PATCHED="No files were patched"
IDS_REMOVE_ODBC="@ has determined that after this uninstall, the ODBC core components will no longer be used. Should these files be deleted?"
IDS_REMOVE_DLL="@ has determined that after this uninstall, the file %s will no longer be used. Should this file be deleted?"
IDS_ERASE_OK="All files on drive '%c' will be erased.\nProceed anyway?"
IDS_FORMAT_OK="This disk in drive '%c' will be formatted, destroying ALL files.\nProceed anyway?"
IDS_ERASE_ARE_YOU_SURE="Are you sure you want to erase all files on drive '%c'?"
IDS_FORMAT_ARE_YOU_SURE="Are you sure you want format drive '%c' destroying all existing files?"
IDS_INVALID_DISKETTE_SPEC="'%s' is not a valid diskette drive name.\n"
IDS_LOGFILE_EXISTS="Requested log file: %s exists already.&\nReplace it?\n(If you choose 'NO', this program will abort.)"
IDS_CANT_OPEN_LOGFILE="Requested log file: %s could not be opened."
IDS_CANTREPLACE="Cannot replace the file %s.&\nContinue with the install?"
IDS_NOSPACE_AFTER_DELETING="The package will require about %ldK of space in the path '%s', yet even after the current contents of this path are deleted, only %ldK will be free.\nYou need %ld bytes (%ldK) more space.\nDo you wish to proceed and create a package even though this may fail?"
IDS_NOTENOUGHSPACE="The package will require about %ldK of space in the path '%s', yet %ldK is free.\nYou need %ld bytes (%ldK) more space.\nDo you wish to proceed and create a package even though this may fail?"
IDS_BAD_PATH="The path: '%s' that you entered is either inaccessible, not valid, or cannot be made.\nCheck the path and run this program again."
IDS_EMPTY_DIR="WARNING: Before copying files, this program will attempt to delete the contents of the existing directory: '%s'.\nAre you sure you wish to proceed?\n"
IDS_FAILED_COPYING="Error: The package could not be successfully copied to the directory: '%s'."
IDS_PDF_FAILED="Error: Failed to create the .pdf file for this package successfully."
IDS_NO_LICENSEINFO="Could not apply the license because a user name and company were not found in c:\sms.ini."
IDS_PACKAGE_CREATED="A package for Microsoft BackOffice has been successfully created in the directory: '%s'.\nThe package definition file: '%s' can also be found in the same directory."
IDS_CANTOPENFILE="Cannot open file '%s'."
IDS_CANTALLOCATEMEMORY="Could not allocate memory."
IDS_ERROREDITING="Error editing the file '%s'."
IDS_REGERROR="An error occurred while attempting to modify the registry."
IDS_REG_ODBC_ERROR="Information about ODBC was expected in the registry, but not found."
IDS_FAILED_MODIFYING_FILE="Could not modify the configuration file:\n%s&\nDo you wish to continue?"
IDS_HELP_BUTTON="?&Help"
IDS_CANCEL_BUTTON="^&Cancel"
IDS_OK_BUTTON=".+&OK"
IDS_FAILEDBACKUP="The file '%s' could not be copied to '%s'.&\n\nDo you wish to continue without a backup?"
IDS_INVALID_DIR="'%s' is not a valid directory."
IDS_NODIR="The directory '%s' does not exist.& Do you want to create it?\n\n(Choose YES to create the directory, or NO to enter a different directory.)"
IDS_ALIAS_EXISTS="The alias '%s' exists already.& Do you wish to enter a different alias?\n\n(Choose YES to go back and enter a different alias, or NO to overwrite the the existing alias.)"
IDS_NODESTINFO="Disk space information from the destination path: '%s' could not be found. An estimate is that about %ldK of space is needed.&\n\nDo you wish to continue anyway?"
IDS_NOSRCINFO="Disk space information for the source path: '%s' could not be found.&\n\nDo you wish to continue anyway?"
IDS_NOFREESPACEINFO="The amount of free space on '%s' cannot be determined. About %ldK free space is needed.&\n\nDo you wish to continue anyway?"
IDS_NSCONFIG_1="Netscape Server was found in:"
IDS_NSCONFIG_2="This dialog lets you choose how to configure Netscape Server for NetImpact Dynamo."
IDS_NSCONFIG_3="Select where to place the NetImpact Dynamo NSAPI DLLs for use by Netscape Server:"
IDS_NSCONFIG_4="Use the path: %s (&recommended)"
IDS_NSCONFIG_5="Use the &path: %s"
IDS_NSCONFIG_6="&Enter a path."
IDS_NSCONFIG_7="NSAPI DLL path:"
IDS_NSCONFIG_8="@ can modify the '%s' file for each Web server under this install of Netscape Server that you want to work with NetImpact Dynamo."
IDS_NSCONFIG_9="&List selected file(s)..."
IDS_NSCONFIG_10="Modify the '%s' file(s)."
IDS_NSCONFIG_11="Below is a list of the %s file(s) for Netscape Web Servers found under this install of Netscape Server. Select the %s file(s) you want @ to configure for NetImpact Dynamo:"
IDS_NSCONFIG_12="Before modifying the %s file(s) do you want to copy the original to a backup with the extension %s in the same directory?"
IDS_NSCONFIG_13="Yes, backup the %s file(s)."
IDS_IISCONFIG_1="'%s' was found on this machine."
IDS_IISCONFIG_2="Location: %s"
IDS_IISCONFIG_3="This dialog lets you choose how to configure the Web server for NetImpact Dynamo."
IDS_IISCONFIG_4="Select where to place the NetImpact Dynamo ISAPI DLLs for use by the Web server:"
IDS_IISCONFIG_5="Use the path: %s (&recommended)"
IDS_IISCONFIG_6="Use the &path: %s"
IDS_IISCONFIG_7="&Enter a path."
IDS_IISCONFIG_8="ISAPI DLL path:"
IDS_IISCONFIG_9="You must enter a virtual alias for this path (e.g. '/Sybase' )."
IDS_IISCONFIG_10="Virtual alias:"
IDS_NID_NS="Netscape Server"
IDS_NID_IIS="Microsoft Web servers"
IDS_NID_CGI="CGI"
IDS_NID_WINCGI="Win-CGI"
IDS_NID_IS_CGI_PRESENT="Do you have a CGI / Win-CGI Web Server on this machine?"
IDS_NID_LOOKFORSERVERS="@ will attempt to detect Microsoft and/or Netscape Web servers on this machine.\n\nIf a Web server is found, @ will offer to do some of the configuration needed for the Web server work with NetImpact Dynamo.\n\nNote that NetImpact Dynamo must already be installed, and your Web server(s) should not be currently running for this to work."
IDS_NID_QUERY_LOOKFORSERVERS="Do you want @ to attempt to detect Microsoft and/or Netscape Web servers on this machine?\n\n(If a Web server is found, @ will offer to do some of the configuration needed for the Web Server to work with NetImpact Dynamo. Note that your Web server(s) should not be currently running for this to work.)"
IDS_NID_NOSERVERSFOUND="@ could not detect Microsoft or Netscape Web servers on this machine. If a web server is installed but was not detected, consult the NetImpact Dynamo documentation to set up your web server manually."
IDS_NID_CANTSETUPSERVERS="Note: @ will not try to detect %s on your machine because one or more of the following NetImpact Dynamo files used by this Web server was not found:\n\n%s&\nReinstall NetImpact Dynamo if you want to detect and configure this Web server."
IDS_NID_CANTSETUPCGI="Note: One or more of the following files that make up the NetImpact Dynamo Application Server for %s Web servers was not found:\n\n%s\nReinstall NetImpact Dynamo if you want to use these files."
IDS_NID_OPTIMAFILESMISSING="@ cannot set up the Web server(s) on this machine because one or more of the following NetImpact Dynamo files was not found in '%s' as expected:\n\n%s&\nTry reinstalling NetImpact Dynamo."
IDS_NID_SUCCESS="Web server configuration completed successfully."
IDS_NID_FAILED="Web server configuration was aborted or did not complete successfully."
IDS_NID_ACCESSDENIED="The destination file '%s' exists already and cannot be written to.\nThe file is probably being used by another application right now.\nMake sure that no applications that could use this file are running (like your Web server), and try this program again."
[SetupErrorMessage]
IDS_WRITEERROR="Error writing to destination file"
